• Peer Reviewed International Journal Paper
  1. Reddy ANR, Abu Saleh, Saiful Islam, Sinin Hamdan, Md Maleque, Biodiesel Production from Crude Jatropha Oil using a Highly Active Heterogeneous Nano–Catalyst by Optimizing Transesterification Reaction Parameters, Energy & Fuels, 30, 1, 334-343.
  2. N. R. Reddy, A. A. Saleh, Md. Saiful Islam, S. Hamdan, Optimization of transesterification parameters for optimal biodiesel yield from crude jatropha oil using a newly synthesized seashell catalyst, Journal of Engineering Science and Technology, 12(10), 2017, 2723- 2732.
  3. N. R. Reddy, A. A. Saleh, Md. Saiful Islam, S. Hamdan, Md. RezaurRahman, H. H. Masjuki, Experimental evaluation of fatty acid composition influence on Jatropha biodiesel physicochemical properties, Journal of Renewable and Sustainable Energy, 10, 013103 (2018).
  4. N.R. Reddy, A.A. Saleh, Md. Saiful Islam, and S. Hamda, Active Razor Shell CaO Catalyst Synthesis for Jatropha Methyl Ester Production via Optimized Two-Step Transesterification, Journal of Chemistry, 2017(2017), Article ID 1489218, 20 pages.
  5. R. Hasan, M.G. Mostafa, NafiurRahman, Md. Saiful Islam and Md. Moynul Islam; “Groundwater Depletion and its Sustainable Management in Barind Tract of Bangladesh”, Research Journal of Environmental Sciences, Science Alert, ISSN 1819-3412, Vol. 12, Issue 5, 2018, pp 247-255.
  6. R. Hasan, M.M Islam, Md. MomtazurRahman, Md. NafiurRahman, Md. Saiful Islam, Investigate the Surface Water Quality Parameters for Domestic Supply, BAUET  Journal, 1(1) 2017, 111-121.
  7. Saiful Islam, S. Hamdan, et al., Tropical wood polymer nanocomposite (WPNC): The impact of nanoclay on dynamic mechanical thermal properties. Composite Science and technology, 72 (2012), 2012, 1995–2001.
  8. Saiful Islam, M.R. Hasan, G.M. AzizurRahman, Md. Moynul Islam, Enhancement of Wood Quality through Chemical Modification with MontmorilloniteNanoclay, BUP journal, 5(1), 2017, 108-120.
  9. Saiful Islam, IrmawatiBintiRamli, M. R. Hasan, Md. Moynul Islam, Kh. Nurul Islam, MahbubHasan, and Ahmad SaffianHarmaen, Effect of Kenaf and EFB Fiber Hybridization on Physical and Thermo-Mechanical Properties of PLA Biocomposites, Fibers and Polymers, 18(1), 2017, 116-121.
  10. Saiful Islam, Md. Moynul Islam, Md. MomtazurRahman, Muhammad Abdul Mun aim Bin MohdIdrus, Properties of green fiber reinforced polypropylene nanocomposites pre-treated with acrylonitrile, BAUET Journal, 1(1) 2017, 91-98.
  11. M Rahman, Md. Saiful Islam, G.S. Li, Development of PLA/CS/ZnOnanocomposites and optimization its mechanical, thermal and water absorption properties, Polymer Testing, 68, 2018, 302-308
  12. K. MohamadHaafiz, Azman Hassan, H.P.S. Abdul Khalil, M.R. NurulFazit, Md. Saiful Islam, I.M. Inuwa, M.M Marliana, M. HazwanHussin. Exploring the effect of cellulose nanowhiskers isolated from oil palmbiomass on polylactic acid properties, International Journal of Biological Macromolecules, 85 (2016), 370–378.
  13. Enamul Hoque, ArsalanMaroof Khan, Md. Saiful Islam, M. Asim, N. Saba, M. Jawaid, Othman Y. Alothman, The effect of natural degradation on the mechanical and morphological properties of tropical woods, Cellulose Chemistry and Technology,  50 (7-8), 723-730 (2016).
  14. Saiful Islam, NurAtiqaBintiHasbullah, MahbubHasan, ZainalAbidinTalib, M. Jawaid, M.K. MohamadHaafiz. Physical, Mechanical and Biodegradable Properties of Kenaf/Coir Hybrid Fiber Reinforced Polymer Nanocomposites. Materials Today Communications, 4 (2015) 69–76.
  15. A. Salam, Mouayed A. Hussein, IrmawatiRamli, Md. Saiful Islam, Synthesis, structural characterization, and evaluation of biological activity of organotin(IV) complexes with 2-hydroxy-5-methoxybenzaldehyde-N(4)-methylthiosemicarbazone, Journal of organometallic chemistry, 2016; 813: 71-77.
  16. Reza Arjmand, Azman Hassan, M.K. MohamadHaafiz, ZainohaZakaria, Md. Saiful Islam, Effect of hydrolysed cellulose nanowhiskers on properties of montmorillonite/polylactic acid nanocomposites, International Journal of Biological macromolecules, 82, 2016, 998–1010.
  17. K. MohamadHaafiz, Azman Hassan, H.P.S. Abdul Khalil, Imran Khan, I.M. Inuwa, Md. Saiful Islam, Md. SohrabHossain, M.I. Syakir, M.R. NurulFazita, Bionanocomposite based on cellulose nanowhisker from oil palm biomass-filled poly(lactic acid), Polymer Testing, 48 (2015) 133-139.
  18. Md. Saiful Islam, Adriana Kovalcik, MahbubHasan, and Vijay Kumar Thakur, Natural Fiber Reinforced Polymer Composites, International journal of polymer science, 2015 (2015), Article ID 813568, 2 pages.
  19. SweetyShahinur, MahbubHasan, QumrulAhsan, Dilip Kumar Saha, and Md. Saiful Islam, Characterization on the Properties of Jute Fiber at Different Portions, International journal of polymer science, 2015 (2015), Article ID 262348, 6 pages.
  20. Layth Mohammed, M. N. M. Ansari, Grace Pua, Mohammad Jawaid, and Md. Saiful Islam, A Review on Natural Fiber Reinforced Polymer Composite and Its Applications, , International journal of polymer science, 2015 (2015), Article ID 243947, 15 pages.
  21. Md. Saiful Islam, N.A.B. Hasbullah, M. Hasan, Z.A. Talib, M.K.M. Haafiz, M. Jawaid, A. Islam I.M. Inuwa. Evaluation of Mechanical, Morphological, and Biodegradable Properties of Hybrid Natural Fiber Polymer Nanocomposites. Polymer composites, 38(3), 2017, 583-587.
  22. FarukHossen, SininHamdan, Md. RezaurRahman, Md. Saiful Islam, FuiKiewLiew, Josephine Chang hui Lai and Md. MizanurRahman. Improved Thermal Properties of Jute Fiber Reinforced Polyethylene Nanocomposites, Polymer composites, 38(7), 2017, 1266-1272.
  23. Md. Saiful Islam, Mansor B. Ahmad, MahbubHasan, Sidek Abdul Aziz, Mohammad Jawaid, M. K. MohamadHaafiz, Siti A. H. Zakaria.Natural Fiber-Reinforced Hybrid Polymer Nanocomposites: Effect of Fiber Mixing and Nanoclay on Physical, Mechanical, and Biodegradable Properties. Bioresources, 10(1), 2015, 1394-1407.
  24. Md. Saiful Islam, SininHamdan, Mansor B. Ahmad, MahbubHasan, Azman Hassan, M. K. MohamadHaafiz, and M. Jawaid, Effect of PVA-co-MMA Copolymer on the Physical, Mechanical, and Thermal Properties of Tropical Wood Materials, Advances in Materials Science and Engineering, Volume 2014 (2014), Article ID 626850, 8 pages.
  25. EnamulHoque, M.A.M. Aminudin,  M. Jawaid,  Md. Saiful Islam,  N. Saba, M.T. Paridah, Physical, mechanical, and biodegradable properties of meranti wood polymer composites. Materials & Design, 64(2014), 2014, 743–749.
  26. Md. Saiful Islam, M.A.S. Ahmed, Azman Hassan, HaafizKassim, K.N Islam, RezaurArjmandi. Impact of Succinic Anhydride on the properties of Jute Fiber/Polypropylene Biocomposites, Fibers and Polymers, 15(2), 2014, 307-314.
  27. Aminul Islam, Yun HinTaufiq-Yap, Eng-Seng Chan, M. Moniruzzaman, Md. Saiful Islam, Md. NurunNabi, Advances in soild-catalytic and non-catalytic technologies for biodiesel production, Energy Conversion and Management, 88, 2014, 1200-1218.
  28. RezaurRahman, SininHamdan, DayangMaryaniAwangHashim, Md. Saiful Islam, Hitoshi Takagi, Bamboo Fiber Polypropylene Composites: Effect of Fiber Treatment and Nano Clay on Mechanical and Thermal Properties. Journal of vinyl & additive technology, 21(4), 2015, 253-258.
  29. Md. Saiful Islam, Abu Saleh Ahmed, Aminul Islam, Sidek Abdul Aziz, Low Chyi Xian, and MoniruzzamanMridha, Study on Emission and Performance of Diesel Engine Using Castor Biodiesel, Journal of Chemistry,Volume 2014(2014), Article ID 451526, 8 pages.
  30. Zainoha Zakaria, Md. Saiful Islam, Azman Hassan, M. K. MohamadHaafiz Reza Arjmandi, I. M. Inuwa M. Hasan. Mechanical Properties and Morphological Characterization of PLA/Chitosan/Epoxidized Natural Rubber Composites, Advances in Materials Science and Engineering, Volume 2013 (2013), Article ID 629092, 7 pages.
  31. Rezaulkarim, Md. FahimRahman, Mahbubhasan, Md. Saiful Islam and Azman Hassan, Effect of Fiber Loading and Alkali Treatment on Physical and Mechanical Properties of Bagasse Fiber Reinforced Polypropylene Composites. Journal of Polymer Materials, 30(4), 2013, 423-433.
  32. K. MohamadHaafiz, Azman Hassan, ZainohaZakaria, I.M. InuwaMd. Saiful Islam. Physicochemical characterization of cellulose nanowhiskers extracted from oil palm biomass microcrystalline cellulose. Materials Letters, 113 (2013), 87–89.
  33. K. MohamadHaafiz, Azman Hassan, ZainohaZakaria, I.M. Inuwa Md. Saiful Islam, M. Jawaid, Properties of polylactic acid composites reinforced with oil palm biomass microcrystalline cellulose, Carbohydrate Polymers, 98(1), 139–145, 2013.
  34. Nurul Islam, Md. Zuki Bin Abu Bakar, Md. Eaqub Ali. Md. Saiful Islam, Norshazlirah ShazlynBte Abd Rahman, A Novel Catalytic Method for the Synthesis of Spherical Aragonite Nanoparticles from Cockle Shells, Powder Technology, 246, 434–440, 2013.
  35. A.M.M. Idrus, S. Hamdan, Md. Saiful Islam, A. A. Roslee, H.R. Sobuz. The effects of binder on the physical and mechanical properties of chemically treated sawdust-reinforced polypropylene composites. Journal of Applied Polymer Science, 129(3), 2013, 1534-1540,
  36. Faseha Shukor, Azman Hassan, Md. Saiful Islam, Munirah Mokhtar, Mahbub Hasan, Effect of ammonium polyphosphate on flame retardancy, thermal stability and mechanical properties of alkali treated kenaf fiber filled PLA biocomposites, Materials and Design, 54 (2014), 425–429.
  37. Yasmeen Gull , Nasir Rasool, Mnaza Noreen, Faiz-ul-Hassan Nasim, Asma Yaqoob, Shazia Kousar, Umer Rashid, Iftikhar Hussain Bukhari, Muhammad Zubair, Md.Saiful Islam, Efficient Synthesis of 2-Amino-6-Arylbenzothiazoles via Pd(0) Suzuki Cross Coupling Reactions: Potent Urease Enzyme Inhibition and Nitric Oxide Scavenging Activities of the Products, Molecules, 18(8), 2013, 8845-8857.
  38. Muhammad Nisar, Ihsan Ali, Muhammad Raza Shah Mughal Qayum, Muhammad Zia-Ul-Haq, Umer Rashid and Md. Saiful Islam, Efficient PPA-SiO2-catalyzed Synthesis of β-enaminones Under Solvent-Free Conditions, Molecules, 18(12), 2013, 15182-15192.
  39. Muhammad Jamil, Muhammad Zubair, Muhammad Asim Farid, Umer Rashid, Nasir Rasool, and Md. Saiful Islam, Antibacterial, Cytotoxic Studies and Characterization of Some Newly Synthesized Symmetrical-Bis(disubstituted)isophthalyl-bis(thioureas) and Their Cu(II) and Ni(II) Complexes, Journal of Chemistry, Volume 2013 (2013), Article ID 789743, 8 pages.
  40. SA Khan, M Ibrahim, Y Jamil, Md. Saiful Islam, F Abbas, Spectrochemical analysis of soil around leather tanning industry using laser induced breakdown spectroscopy, Journal of Chemistry 2013(2013), Article ID 894020, 6 pages.
  41. Md.Saiful Islam, SininHamdan, ZainalAbidinTalib, Abu Saleh Ahmed, Md. Rezaur, Tropical wood polymer nanocomposite (WPNC): The impact of nanoclay on dynamic mechanical thermal properties. Composite Science and technology, 72 (2012), 2012, 1995–2001.
  42. Sinin Hamdan, Saiful Islam, Abu Saleh Ahmed, M.R. Rahman, M. Rusop, Study on Thermal and Biodegradation Resistance of Tropical Wood Material Composites, Journal of Applied Polymer Science, 128(3), 2013, 1842-1847.
  43. Rezaur Rahman, Sinin Hamdan, Md. Saiful Islam, Abu Saleh Ahmed, Influence of nanoclay/phenol formaldehyde resin on wood polymer nanocomposites, Journal of applied sciences, 12(14), 2012, 1481-1487.
  44. Md. Saiful Islam, SininHamdan, I. Jusoh, Md. RezaurRahman and Abu Saleh Ahmed. The effect of alkali pretreatment on mechanical and morphological properties of tropical wood polymer composites, Materials & Design, 33, 2012. 419-424.
  45. Md. Saiful Islam, Sinin Hamdan, Ismail Jusoh, Md. Rezaur Rahman, M. A. M. Mohd Idrus, Dimensional stability and water repellent efficiency measurement of chemically modified tropical light hard wood, BioResources, 7(1), 2012, 1221-1231.
  46. Md. Saiful Islam, SininHamdan, Ismail Jusoh, Md. Rezaur Rahman, M. A. M. Mohd Idrus, Physico-mechanical and decay resistance properties of chemically modified tropical wood material, Journal of Applied Polymer Science, 127(3), 2013, 1555-1560.
  47. Md. Saiful Islam, SininHamdan, Ismail Jusoh, Md. RezaurRahman, Effect of coupling reaction on the mechanical and biological properties of tropical wood polymer composite (WPC), Biodeterioration& Biodegradation,72(2012), 2012, 108-113.
  48. Md. Saiful Islam, Sinin Hamdan, H. R. Sobuz, Rezaur Rahman, A.S. Ahmed. Thermal and decay resistance properties of tropical wood plastic composites. Journal of composite materials, 47(12), 2013, 1493-1500.
  49. Noor Md. SadiqulHasan, HabiburRahmanSobuz, Md. ShibleeSayed, Saiful Islam, The use of Coconut Fiber in the Production of Structural Lightweight Concrete, Journal of Applied Sciences, 12(9), 2012, 831-839.
  50. Md. Saiful Islam, SininHamdan, M. R. Rahman and I. Jusoh, The effect of crosslinker on mechanical and morphological properties of tropical wood material composites, Materials & Design, 52, 2011, 2221-2227.
  51. Md. Saiful Islam, SininHamdan, I. Jusoh, M. R. Rahman, Z.A Talib, “Dimensional stability and dynamic Young’s modulus of tropical light hardwood chemically treated with MMA in combination with HMDIC crosslinker, Industrial & Engineering Chemistry Research, 55(7), 2011, 3900-3906.
  52. Md. Saiful Islam, SininHamdan, M. R. Rahman, I. Jusoh, A.A. Saleh and Mun’aimIdrus, Dynamic Young’s modulus, morphological, and thermal stability of 5 tropical light hardwoods modified by benzene diazonium salt treatment, BioResources, 6(1), 2011, 737-750.
  53. RezaurRahman, SininHamdan, Md. Saiful Islam, Md. ShahjahanMondol. Mechanical Properties and Decay Resistance of Wood Polymer Composites (WPC). Advanced Materials Research, 819, 2011, 264-265.
  54. R. Rahman, S. Hamdan, A. A. Saleh, Md. Saiful Islam, W. F. Wan Abdullah & M. S. Che Mat, “Thermogravimetric analysis and dynamic Young’s modulus measurement of N, N-dimethylacetamid impregnated wood polymer composites (WPC), Journal of Vinyl and additive Technology,17(3), 2011, 177-183.
  55. M. Sutan, S. Hamdan, H. R. Sobuz, V.Le. ak. Laja and Md. Saiful Islam, Porosity and Strength of PozzolaModified Cement Systems, Concrete Research Letters, 2(4), 2011, 326-335.
  56. SininHamdan, M. R. Rahman, A. A. Saleh, Z. A. Talib and Md. Saiful Islam, Influence of N, N- Dimethylacetamid on the thermal and mechanical properties of wood polymer composites (WPC), BioResources, 5(4), 2010, 2611-2624.
  57. Sinin Hamdan, Z. A. Talib, M. Rahman, A. A. Saleh, and Md. Saiful Islam, Dynamic Young’s modulus measurement of treated and post treated tropical wood polymer composites (WPC), BioResources, 5(1), 2010, 324-342.
  58. Mominul Haque, Md. Nazrul Islam, Md. Monimul Huque, Mahbub Hasan, Md. Saiful Islam, and Md. Sakinul Islam, Coir Fiber Reinforced Polypropylene Composites: Physical and Mechanical Properties, Advanced Composite Materials, 19, 2010, 91–106.
  59. Mominul Haque, Md. Saiful Islam, Md. Sakinul Islam, Md. Nazrul Islam and Md. Monimul Huque, Physico-mechanical Properties of Chemically Treated Palm Fiber Reinforced Polypropylene Composites, Journal of reinforced plastics and composites, 29(11), 2010, 1734-1742.
  60. Mominul Haque, Mahbub Hasan, Md. Saiful Islam, Md. Ershad Ali. ‘Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites, Bioresource Technology, 100, 2009, 4903–4906.
  61. -N. Chowdhury, Md. Saiful Islam and M. Shafiul Azam, Polymeric Matrix Containing Nickel Ferromagnet. Journal of Applied Polymer Science, 103, 2006, 321-327.
  62. Md. Saiful Islam, Sinin Hamdan, M.A.S. Ahmed, N. M. Sutanand N.M.S. Hasan, The chemical modification of tropical wood polymer composites, Journal of composite materials, 48(7), 2014, 783-789.
  63. Abu Saleh Ahmed, Md. Saiful Islam, Md. Ashraful Hoque, and Yogeswaran, Production of Bioethanol from Tropical Woody Biomass, Open J of Renewable Energy and Sustainable Development, 1(2), 2014, 1-8.
  64. Laila ArjumanBanu, Md. Saddam Hossain, C.M. Zakaria, Md.  Saiful Islam and Kudrat-E-Zahan, Synthesis, Characterization, and Antimicrobial Studies on The Co(II), Ni(II) and Cu(II) Metal Complexes With Schiff Base and Heterocyclic Amine, BAUET Journal, 1(1), 2017, 157-162.
  65. Habibur Rahman Sobuz, Noor Md. Sadiqul Hasan, Nafisa Tamanna, and Md. Saiful Islam, Structural Lightweight Concrete Production by Using Oil Palm Shell. Journal of Materials, 2014(2014), Article ID 870247, 6 pages.
  66. Md. Saiful Islam, Sinin Hamdan, Mohamad Rusop, Md. Rezaur Rahman, Mechanical and Morphological Properties of Tropical Wood Polymer Nanocomposite (WPNC), Advanced Materials Research, 667, 2013, 200-205.
  67. Md. Saiful Islam, Sinin Hamdan, Mohamad Rusop, Md. Rezaur Rahman. Thermal Stability and Decay Resistance Properties of Tropical Wood Polymer Nanocomposites (WPNC), Advanced Materials Research, 667, 482-489, 2013.
  68. Md. Saiful Islam, S. Hamdan, M. R. Rahman, I. Jusoh, and N. F. Ibrahim, “Dynamic Young’s Modulus and Dimensional Stability of Batai Tropical Wood Impregnated with Poly Vinyl Alcohol, Journal of Scientific Research, 2(2), 2010, 227-236.
  69. Md. Saiful Islam, Sinin Hamdan, Md. Rezaur Rahman, Effects of Polymer Loading on Tropical Wood Polymer Composite (WPC), Advanced Materials Research, 264(265), 2011, 631-635.
  70. A.M. MohdIdrus, S. Hamdan, M. R. Rahman and Md. Saiful Islam. Treated tropical wood sawdust-polypropylene polymer composite: mechanical and morphological study. Journal of Biomaterials and Nanobiotechnology,2, 435-444, 2011.
  71. A.M. MohdIdrus, S. Hamdan, M. R. Rahman and Md. Saiful Islam, Liquefied tropical wood/polypropylene composites: preparation and physico-mechanical properties. Materials Physics and Mechanics, 11, 2011, 126-136.
  72. Habibur Rahman Sobuz, Ehsan Ahmed, Noor Md. Sadiqul Hasan, Md. Saiful Islam, Study on Removal of Brick Clay Salinity in the Manufacture of Conventional Structural Bricks, International journal of civil and structural engineering, 1(3), 2010, 466-476.
  73. Md. Saiful Islam, SininHamdan, I. Jusoh, Md. RezaurRahman, Abu Saleh Ahmed, The effect of alkali pretreatment on mechanical and morphoolocal properties of tropical wood polymer composites, Materials and Design, 33(2012), 419-424.
  74. Md. Saiful Islam, Abu Saleh Ahmed, Aminul Islam, Sidek Abdul Aziz, Low Chyi Xian, and Moniruzzaman Mridha, Study on Emission and performance of Diesel engine using castor biodiesel, Journal of chemistry, 2014(2014), Article ID 451526, 8 pages.
  75. M Bashir, S Khalid, U Rashid, M Adrees, M Ibrahim, Md. Saiful Islam, Assessment of Selected Heavy Metals Uptake from Soil by Vegetation of Two Areas of District Attock, Pakistan, Asian Journal of Chemistry 26 (4), 1063.
  76. Humera Iram, NasirRasool, Muhammad Riaz, Muhammad Zubair, Umer Rashid, Iftikhar Hussain Bukhari, Rasool BakhshTareen, Md. Saiful Islam, Antioxidant, Antimicrobial, Cytotoxicity and HPLC Studies of Sophoramollis, Asian Journal of Chemistry 25 (18), 10519.
  77. Moynul Islam, M. Rostom Ali, Md. Saiful Islam,Effect of some parameters on cyclic voltammetry of selenium in ethaline, Journal of Emerging Technologies and Innovative Research7(6), 2020, 1585-1587.
  78. Moynul Islam, M. Rostom Ali, and Md. Saiful Islam,Effect of some parameters on cyclic voltammetry of chro-mium in reline, Global Scientific Journal,8(6), 2020, 1967-75.
  79. Md. Shaharul Islam, Md. Hafizur Rahman, G M Arifuzzaman Khan, M Shamsul Alam, Md. Helal Uddin: A Study on Moisture Content of Bamboo Fiber Reinforced HDPE Composite at Different Temperature,  American Journal of Chemical Research, 3(16),1-6(2019).
  80. Md. Shaharul Islam, Atiqur Rahman and Md. Helal Uddin: Isolation of Organic Compounds from Medicinal Plant (Mimusops elengi) and Their Chemical Analysis, Asian Journal of Physical and Chemical Sciences, 4(3),1-7(2018).
  81. Md. Monjurul Islam, B. M. Saifur Rahman, Most. Shahida Khatun, Md. Jahangir Hossain, Md. Tanjirul Huda, Md. Shaharul Islam, G. M. Arifuzzaman Khan, Md. Helal Uddin: Sonochemical degradation of phenol and Para-Chlorophenol in an Ultrasonic bath in the presence of inorganic salts and H2O2, International Journal for Emprical Education and Research, 1(1), 53-63(2018).
  82. Muhammad Abdul Mun’aim Mohd Idrus, Md. Shaharul Islam, Siti Afiza Binti Johari Jamaludin, Shamsul Effendy Bin Abd Hamid: Flammability and Impact properties of Cotton Fiber (Batik) Reinforced Fiberglass Composite for Marine Application, BAUET Journal, 1(1), 25-34(2017).
  83. S. Yasmin Priya, G. M. Arifuzzaman Khan, M. Helal Uddin, M. Ahsanul Haque, M. Shaharul Islam, M. Abdullah-Al Mamun, M. A. Gafur and M. Shamsul Alam: Characterization of Micro-fibrillated Cellulose Produced from Sawmill Wastage: Crystallinity and Thermal properties, American Chemical Science Journal, 9(1), 1-8(2015).
  84. Md. Helal Uddin, M. Z. H. Khan, Md. Shahrul Islam, G. M. Arifuzzaman Khan, Md. Abdullah Al Muhit, Md. Abdul Momin, SK Shahinur Rahman: A Study on Volumetric and Viscometric Properties for the mixtures of DMF and Other Alcohols from temperature ranges 303.15K to 323.15K, Journal of advances in natural sciences. 2, 133-148(2014)
  85. Md. Shaharul Islam, Md. Helal Uddin, Md. Abdullah-Al-Masud and Md. Ahsanul Haque: Studies on Excess Volumetric and Viscometric Properties for DMF and Other Alcohols Mixtures from 303.15K to 323.15K, An International Conference on Green Chemistry for Sustainable Development, JSTU (ID NO. PHRPP08),155-156(2012).
  86. Md. Moynul Islam, M. Rostom Ali and Md. Saiful Islam, effect of some parameters on cyclic voltammetry of selenium in ethaline, Journal of Emerging Technologies and Innovative Research (JETIR), Vol. 7, Issue 6, 2020, pp 1584-1587. ISSN-2349-5162
  87. Md. Moynul Islam, M. Rostom Ali and Md. Saiful Islam, effect of some parameters on cyclic voltammetry of chromium in reline, Global Scientific Journal (GSJ), Vol.8, Issue 6, 2020, pp 1967-1974. ISSN 2320-9186
  88. Md. Moynul Islam, M. Rostom Ali and Md. Saiful Islam, Effect of Various Parameters on Cyclic Voltammetry of Chromium in Choline Chloride Based Ionic Liquid, International Journal of Innovative Science and Research Technology (IJISRT), Vol. 5, Issue 9, 2020, pp 1473-1478. ISSN No: 2456-2165
  89. M Rostom Ali and Md. Moynul Islam: “Electrodeposition of cadmiumfrom a choline chloride based ionic liquid”; Journal of Electrochemistry, Article No. 180226(Accepted & Under processing for publication).
  90. M Rostom Ali, Md. Moynul Islam and Md. Mofazzal Hossain, “Electrodeposition of zincfrom choline chloride based ionic liquids”; Pakistan Journal of Scientific and Industrial Research (PJSIR), Article Id: PJSIR-3139. (Accepted & Under processing for publication).
  91. Rostom Ali, Md. Moynul Islam, Md. Ahsan Habib, “Electrodeposition of Selenium from Choline Chloride Based Ionic Liquid”; BAUET JOURNAL, Vol. 02, Issue 01, 2019, PP 66–73.
  92. R. Hasan, M.G. Mostafa, Nafiur Rahman, Md. Saiful Islam and Md. Moynul Islam; “Groundwater Depletion and its Sustainable Management in Barind Tract of Bangladesh”, Research Journal of Environmental Sciences, Science Alert, ISSN 1819-3412, Vol. 12, Issue 5, 2018, pp 247-255.
  93. Khaleque, M. Afroze, M. Khan, M. S. Hossain, M. M. Islam and M. Nurunnabi, “Upgrading Pyrolysis Oil for Alternative Sources of Petroleum”, BAUET journal, Vol. 01, Issue 02, 2018, pp 79-88.
  94. Rostom Ali, Md. Moynul Islam, Md. Golam Zakaria and Md. Ziaur Rahman, “Electrodeposition of Chromium From Eutectic – Based Ionic Liquid”, BAUET journal, Vol. 01, Issue 01, 2017, PP 35–43.
  95. Saiful Islam, Md. Moynul Islam, Md. Momtazur Rahman, Muhammad Abdul Mun’aim Bin MohdIdrus, “Properties of Green Fiber Reinforced Polypropylene Nanocomposites Pre-Treated With Acrylonitrile”, BAUET journal, Vol. 01, Issue 01, 2017, PP 91 – 98.
  96. R. Hasan, M.M. Islam, Md. Momtazur Rahman, Md. Nafiur Rahman, Md. Saiful Islam, “Investigate the Surface Water Quality Parameters for Domestic Supply”, BAUET journal, Vol. 01, Issue 01, 2017, pp 111-121.
  97. Md Saiful Islam, Irmawati Binti Ramli, M R Hasan, Md. Moynul Islam, Kh Nurul Islam, Mahbub Hasan, Ahmad SaffianHarmaen: “Effect of Kenaf and EFB Fiber Hybridization on Physical and Thermo-Mechanical Properties of PLA Biocomposites’; Journal of Fibers and Polymers , Vol.18, No.1, 2017, 116–121.
  98. Saiful Islam, M.R. Hasan, G.M. Azizur Rahman and Md. Moynul Islam: “Enhancement of Wood Quality through Chemical Modification with Montmorillonite Nanoclay”, BUP JOURNAL, Vol.-5, Issue-1, May 2017, 108 – 120.
  99. Siddhartha Sankar Saha, Jewel Hossen, Md Moynul Islam; “Solvent Extraction of Ti(IV) From Aqueous Sulphate Solution By Cyanex 301 Dissolved in Kerosene : Equilibrium Studies. International Journal of Scientific Research, Vol: 5, Issue: 4, 2016, 552–555.